107
2. Press the Lens Shift button on the control panel or remote control.
3. Press the arrow buttons on the remote control or the control panel to adjust the position of the
projected image as necessary.
Note: When adjusting the image height, position the image lower than where you want it to be and
then move it up. This will help prevent the image from moving down after adjustment.
Here are the lens shift ranges for the optional lenses:
ELPLU04/ELPLW06/ELPLW08/ELPLM10/ELPLM11/ELPLM15/ELPLL08
To Next Page
Loading...
