126
1 HDMI or DVI-D source
2 HDBaseT port or network source
3 SDI port source
4 Computer or BNC port source
5 Input ports on the interface board in Slot 1
6 Input ports on the optional interface board in Slot 2
The Sync. light on the control panel turns on for the currently selected input source.
Parent topic: Using Basic Projector Features
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 98.4 feet
(30 m) away. You can point it at the front or rear of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
To Next Page
Loading...
