253
LAN light WLAN light Status and solution
— Flashing blue quickly Connecting to a device.
— Flashing blue slowly Wireless error. Turn the projector off and
then on again.
— Off Wireless LAN is unavailable. Check your
wireless LAN settings.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related concepts
Air Filter and Vent Maintenance
Wired Network Projection
Wireless Network Projection
Related references
Projector Setup Settings - Extended Menu
Optional Equipment and Replacement Parts
Projector Feature Settings - Settings Menu
Where to Get Help
Related tasks
Turning On the Projector
Shutting Off the Picture Temporarily
Turning Off the Projector
Related topics
Attaching and Removing a Lens
Copying Menu Settings Between Projectors
Viewing Projector Status Information
You can monitor the projector's status and view error information on the LCD screen.
Note: You can also view the projector's status in the Info menu. Press the i button on the remote control
and select Status Information.
To Next Page
Loading...
