41
Note: See the documentation that came with the HDBaseT transmitter for instructions on connecting
it to your video device or computer.
4. Turn on the projector and HDBaseT transmitter.
Note: To enable communication from the Ethernet and serial ports on the transmitter, select On as the
Control Communications setting in the projector's Extended menu. Turning on this setting disables the
projector's LAN, RS-232C, and Remote ports. If you connected an Extron XTP transmitter or switcher to
the projector's HDBaseT port, select On as the Extron XTP setting in the projector's Extended menu.
Parent topic: Projector Connections
Related references
Projector Setup Settings - Extended Menu
Connecting to an External Computer Monitor
If you connected a computer to the projector's Computer In or BNC In ports, or a video source to the
projector's SDI In port, you can also connect an external monitor to the projector. This lets you see your
presentation on the external monitor even when the projected image is not visible.
1. Make sure your computer or video source is connected to the projector's Computer In, BNC In, or
SDI In port.
To Next Page
Loading...
Need help?
General