Epson Pro L20002UNL - Connecting to a Computer for 5 BNC Video; Connecting to a Computer for Displayport Video

39
2. Connect the other end to the projector's DVI-D In port on the HDMI/DVI-D interface board in slot 1.
Parent topic: Connecting to Computer Sources
Connecting to a Computer for 5 BNC Video
You can connect the projector to your computer using an optional VGA-to-5-BNC cable.
1. Connect the VGA connector to your computer's monitor port.
2. Connect the 5 BNC connectors to the projector's BNC In ports.
Parent topic: Connecting to Computer Sources
Connecting to a Computer for DisplayPort Video
If your computer has a DisplayPort connector, you can connect it to the projector using an optional
DisplayPort cable. You must have installed the optional DisplayPort interface board in slot 2 to provide a
DisplayPort connection.
1. Connect the DisplayPort cable to your computer's DisplayPort connector.