235
Replacing the Air Filters
Parent topic: Projector Maintenance
Related references
Projector Light Status
Cleaning the Air Filters and Air Intake Vents
You need to clean the projector's air filters and air intake vents in the following situations:
• The filters or vents get dusty.
• You see a message telling you to clean it.
Note: To receive air filter notifications, make sure the Air Filter Notice setting is set to On in the
Extended menu Display settings.
• The projector's Filter light flashes orange.
Note: The projector has two air filters on the front. The illustrations here show cleaning the air filter on
the right, but the steps are the same to clean either filter.
1. Turn off the projector, wait for the projector to beep, and unplug the power cord.
To Next Page
Loading...
