143
1. Press the Shutter button on the projector's control panel or remote control to temporarily stop
projection.
2. To turn the picture back on, press the Shutter button again.
Note: To fade the image in and out when you press the Shutter button, turn on the Fade-out and Fade-
in settings in the Extended menu. If you selected Shutter as the Shutter Release setting in the
Extended menu, you can still control the projector while the shutter feature is active.
Parent topic: Adjusting Projector Features
Related references
Projector Setup Settings - Extended Menu
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and keep the current image on
the screen. Any video action continues to run, however, so you cannot resume projection at the point
that you stopped it.
To Next Page
Loading...
Need help?
General