209
Setting Options Description
Dynamic Contrast Off
Response Speed
Black Level
Adjusts the luminance of the
image to improve contrast by
tracking changes in image
brightness
Response Speed: select either
Normal to adjust brightness at
the standard speed or High
Speed to adjust brightness as
soon as the scene changes
Black Level: select the black
level you want to project when
the brightness level of the image
signal is zero; if you select 0%,
the light source turns off
Light Source Control Dynamic Contrast Automatically adjusts the amount
of light according to the
brightness of the image.
Lights-Out Control Automatically turns off the light
after a certain time has elapsed
while projecting at the specified
video level.
Lights-Out Signal Level: select
the brightness level for the
current video signal
Lights-Out Timer: select the
amount of time before the light
source automatically turns off
Note: The Brightness setting does not affect laser brightness. To change the laser brightness, use the
Brightness Settings in the Settings menu.
Parent topic: Adjusting the Menu Settings
Related concepts
Using Advanced Image Adjustment Features
To Next Page
Loading...
