249
On/Standby
(power) light
Status
light
Laser
light
Temp light Filter
light
Status and solution
Blue Blue Flashing
orange
fast
Off Off Projector is connected to a 110 V
power source and the laser is
operating at approximately 55% of
available power.
For optimal performance, connect
the projector to a 220 V power
source using the 220 V power cord
that came with the projector.
Blue Flashing
blue
Off Off Off Cooling down. All buttons are
disabled.
Flashing blue Off Off Off Off Preparing network monitoring. (Wait
for the light to remain orange before
unplugging the projector.)
Blue Blue Flashing
blue
Off Off The shutter feature is enabled.
Off Flashing
blue
Flashing
orange
Off Off Internal error. Turn off the projector,
unplug the power cord, and contact
Epson for help.
Off Flashing
blue
Off Flashing
orange
Off A fan or sensor has a problem. Turn
off the projector, unplug the power
cord, and contact Epson for help.
To Next Page
Loading...
