25
1 On button (turns on the projector)
2 Standby button (turns off the projector)
3 Source buttons (select an image source)
4 User1, User2, and User3 buttons (open menu assigned by user)
5 Aspect button (selects the image aspect ratio)
6 Auto button (automatically adjusts computer images)
7 Freeze button (stops video action)
8 Default button (resets settings to their default values in the projector menu system)
9 Menu button (accesses projector menu system)
10 Arrow buttons (move through on-screen options and move pointer)
11 Enter button (selects options)
12 On-Screen button (displays or hides the on-screen menus or messages)
13 Zoom button (changes the image size)
14 Focus button (adjusts the image focus)
15 Lens Shift button (adjusts the image position)
16 Page up and down buttons (scroll through image files when projecting from a computer over a
network connection, or change the displayed test pattern)
17 Numeric buttons (enter numbers)
18 ID button (hold down and use numeric keys to select projector to control)
19 ID switch (selects control of one or all projectors from the remote control)
20 Remote port (connects to a remote control cable)
21 i button (displays the Info menu)
22 Num button (hold down and use numeric keys to enter numbers)
23 Test Pattern button (displays a test pattern)
24 Geometry button (corrects image shape)
25 Calibration button (starts lens calibration)
26 Distortion button (corrects image distortion)
27 Shutter button (turns signal on or off temporarily)
To Next Page
Loading...
