43
1. Turn off the projector and unplug the power cord.
Caution: Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the
lens surface. Make sure the front of the projector is not facing up when you attach the lens. This
prevents dirt or dust from entering the projector and lowering the projection quality.
2. Use your hand to loosen the screw securing the lens cover to the projector.
3. Press the buttons on the sides of the lens cover and pull the lens cover off the projector.
4. If you are attaching the ELPLX02 or ELPLX02W lens, loosen the screws securing the lens
replacement cover on top of the projector and slide the cover off as shown.
To Next Page
Loading...
