START
PG Adjustment
Set the PG adjust lever to +.
Set the PG adjust lever to 0.
Set the PG adjust lever to +.
Set the PG adjust lever to 0.
PG Adjustment
PG Adjustment
Move the carriage unit to the left.
Move the carriage unit to the right.
Move the carriage unit to the left.
Set the PG adjust lever to 0.
Set the PG adjust lever to +.
Is left PG OK?
END
PG Adjustment
OK
NO
Is left PG OK?
NO
YES
Is right PG OK?
NO
YES
Does a
1.14 mm gauge
pass?
Widen PG
Narrow PG
YES
YES
NO
NO
Return to
main flowchart
Does a
1.18 mm gauge
pass?
Figure 4-3. Platen Gap Adjustment Flowchart
Adjustments
4-6 EPSON Stylus 1500 Service Manual
To Next Page
Loading...
