Epson Stylus 1500 - Procedures for Disassembly and Assembly

Procedures for Disassembly and Assembly
WARNING
❒ Follow all the precautions on page 3-3 when disassembling the printer.
This section consists of the topics shown in the diagram below. See the exploded view of the printer
in the Appendix, if necessary.
3-33
Front /Rear PE Sensor Removal
Power Supply Unit (C172 PSB/PSE)
Removal
3-12
START
3-7
Upper Housing Assembly Removal
3-34
ROM Replacement
3-9
Printer Mechanism (M-4E60) Removal
3-10
Main Controller (C172 MAIN Board)
Removal
CR Motor Removal
3-13
PF Motor Removal
3-14
3-15
Release Sensor Removal
Carriage Home Position Sensor Removal
3-15
DE Sensor Removal
3-16
Black Head Removal
3-17
Cartrdge Holder Unit Removal
Carriage Unit Removal
3-21
3-22
3-24
3-25
Paper Eject Frame Unit Removal
Pump Unit Removal
3-26
3-27
3-29
3-31
Base Frame Removal
Paper Eject Drive Unit Frame Removal
Paper Pickup Roller Unit Removal
Paper Feed Roller Unit Removal
3-32
Middle Frame Unit Removal
3-20
Left / Right Ink Drain Pad Removal
Figure 3-1. Disassembly Flowchart
Disassembly and Assembly
3-6 EPSON Stylus 1500 Service Manual