Paper Eject Frame Unit Removal
1. Remove the printer mechanism. (See page 3-9.)
2. Remove the carriage unit. (See page 3-22.)
3.
Remove 3 (CBS 3 × 6) screws securing the paper eject frame unit to the left frame, the right
frame, and the middle frame, and then remove the paper eject frame unit.
CAUTION
While removing the paper eject frame unit, insert a clean and soft paper towel between
printhead and the paper feed roller unit to protect the printhead nozzles.
CBS 3 x 6
Paper Eject Frame Unit
Left Frame
Right Frame
Middle Frame
Figure 3-21. Removing the Paper Eject Frame Unit
Disassembly and Assembly
3-24 EPSON Stylus 1500 Service Manual
To Next Page
Loading...
