Setting Menus
The default setting menus are described in the table below.
Table 1-8. Default Settings
Menus
Settings
(underlines indicate factory default settings)
Print direction
*1
Auto / Bi-D / Uni-D
Font
Draft / Roman / Sans Serif /
Courier / Prestige / Script / Roman T /
Sans Serif H
Pitch
10 cpi / 12 cpi / 15 cpi / 17.1 cpi / 20 cpi / Proportional
I/F mode Auto / Parallel / Serial
Auto I/F wait mode 10 seconds / 30 seconds
Software
ESC/P2 / IBM X24E
Auto CR
(IBM mode only)
On /
Off
Alternate Graphics
Mode (AGM)
(IBM mode only)
On /
Off
Character tables
(standard version)
Italic
PC 437 PC 850 PC 860 PC 863 PC 865
PC 861 BRASCII Abicomp Roman 8 ISO Latin 1
International
character set for
italic table
Italic U.S.A. Italic France Italic German Italic U.K.
Italic Denmark Italic Sweden Italic Italy Italic Spain 1
Auto line feed On /
Off
Network I/F mode
Off: Used in standalone environment
On: Used in network environment
Zero slash
0 / Ø (with slash)
Page length for
continuous paper
11 inches 12 inches 8.5 inches 70/6 inches Other
*2
Skip over perforation On / Off
Auto tear off
On / Off
Print mode
*3
Plain paper (pure black) / Plain paper (composite black) /
EPSON premium ink jet paper / Transparencies
Paper roll On /
Off
Notes: *1. Refer to Tables 1-9 and 1-10.
*2. This is selected when a value other than 11, 12, 8.5, or 70/6 inches has been placed
in EEPROM by the ESC | command.
*3. This mode is provided only for DOS users and is selected based on the paper type
Pure black and composite black are selected according to the printed result.
Printer Features
1-20 EPSON Stylus 1500 Service Manual
To Next Page
Loading...
