Paper Feeding
Feeding method: Friction feed with built-in auto sheet feeder (ASF)
and push tractor feed
Note : Reverse feeding beyond 9.5 mm (0.38") is not allowed.
Line spacing: 1/6 inch, 1/8 inch, or programmable in units of 1/360 inch
Paper paths: Cut sheet front entry / front exit by ASF
Single sheet rear entry / front exit and continuous paper
rear entry / front exit
Feeding speed: 71 ms (1/6 inch)
3 inches/second (continuous feeding)
Input Data Buffer
Capacity: 256KB
Electrical Specifications
120 V Version
Rated voltage: 120 VAC
Input voltage range: 103.5 - 132 VAC
Rated frequency range: 50 - 60 Hz
Input frequency range: 49.5 - 60.5 Hz
Rated current: 0.7 A
Power consumption: Approximately 23 W (self-test with 10 cpi LQ characters)
Insulation resistance:
10 MΩ minimum (500 VDC between AC line and chassis)
Dielectric strength: 1000 VAC
RMS for 1 minute or 1200 VAC RMS for 1
second between AC line and chassis
220 V Version
Rated voltage: 220 - 240 VAC
Input voltage range: 198 - 264 VAC
Rated frequency range: 50 - 60 Hz
Input frequency range: 49.5 - 60.5 Hz
Rated current: 0.4 A
Power consumption: Approximately 20 W (self-test with 10 cpi LQ characters)
Insulation resistance:
10 MΩ minimum (500 VDC between AC line and chassis)
Dielectric strength: 1000 VAC RMS for 1 minute or 1200 VAC RMS for 1
second between AC line and chassis
Printer Features
EPSON Stylus 1500 Service Manual 1-7
To Next Page
Loading...
