5.
Remove 3 (CBB 3 × 12) screws and 3 (CBB 4 × 20) screws securing the upper housing to the
lower housing.
6. Insert a standard screwdriver in the holes in the lower housing, disengage the hooks, and
remove the upper housing from lower housing by lifting it upward.
CAUTION
❒ Hold the carriage unit in the capping position to prevent the head from drying up.
Ink Cartridge Cover
Hooks for Lower Housing
Rear Sheet Guide
Tractor Unit
Upper Housing
Control Panel
CBB 3x12
CBB 4x20
CBB 3x12
Knob
Release Lever
Lower Housing
Printer Cover
Figure 3-4. Removing the Upper Housing
Disassembly and Assembly
3-8 EPSON Stylus 1500 Service Manual
To Next Page
Loading...
