Epson Stylus C62 User Manual

EPSON Stylus C50/C60/C61/C62 Revision C
Disassembly and Assembly Disassembly 111
CHECK
PO INT

When removing the Main board shield plate from the Main
board, pull the part indicated below vertically and remove it.
Figure 4-44. Main board shield plate removal
Pull

When assembling the M/B mounting plate to the Main frame,

Slide the hooks on the M/B mounting plate in the order
indicated in the following figure.
Figure 4-45. M/B mounting plate assembling
Fasten four screws (C.B.S. SCREW 3x6 F/Zn) for securing
the M/B mounting plate to the Main frame
Tightening torque for each screw is as follows.
•
C.B.S. SCREW, 3x6, F/Zn (1 pcs) : 9 ± 1 kgf.cm

When assembling the Main board to the M/B mounting plate,

Make sure to set it to the M/B mounting plate correctly.

Do not touch the LED on the Main board
1
2
3
4
C.B.S. Screw, 3x6, F/Zn

Epson Stylus C62 Specifications

Printing

printing method	4-color (CMYK) drop-on-demand Micro Piezo ink jet technology
resolution (dots per inch)	Up to 5760 x 720 optimized dpi
print speed (black text memo)	14 ppm

Paper Handling

maximum paper size	up to 8.5" x 44"
input paper tray capacity	100 sheets/10 envelopes
envelope types	No. 10, DL, C6

Dimensions and Weight

dimensions (L x W x H)	18.8" x 10.2" x 7.1"
weight	7.5 lb
maximum printable area	8.26" x 10.76"