EasyManuals Logo

Epson Stylus C62 User Manual

Epson Stylus C62
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
EPSON Stylus C50/C60/C61/C62 Revision C
Operating Principles Overview 39
2. Carriage lock operation by the Change lever
Unlike the previous printer (Stylus COLOR 680), these printers do not have the
Carriage lock lever with the Wiper.
Instead of the Carriage lock lever, the Change lever is set to the front side of the
printer while the CR unit is in the CR home position.
(As for the detailed mechanism for setting the Change lever, refer to Figure 2-9
Step 2)
2.1.6 Ink Sequence
Initial ink charge
After the printer is purchased and the power is turned on for the first time, the
printer must perform the initial ink charge to charge the ink inside the ink cavity.
When the initial ink charge is completed properly, the printer releases the flag
inside the EEPROM. The Stylus C50 takes 105 seconds to complete the initial ink
charge sequence and consumes 1/8 of the brand-new black ink cartridge & 1/8 of
the brand-new color ink cartridge. And also, the Stylus C60 takes 80 seconds for
the initial ink charge and consumes about 1/4 of the brand-new black ink cartridge
& about 1/8 of the brand-new color ink cartridge. If the power is turned off during
the initial ink charge on these printers, the CL1' will be performed at next power
on timing.
Manual Cleaning
The Stylus C50 provides three types of manual cleaning, and the Stylus C60/C61/
C62 provides four types of manual cleaning to clean air bubbles, clogged ink with
viscosity or foreign substances.
The following manual CL can be performed by the control panel operation, the
printer driver utility and the Adjustment program.
CL1
- Ink absorption
Black Ink: 0.21g, Color Ink: 0.21g
(Stylus C50)
Black Ink: 0.155g, Color Ink: 0.155g
(Stylus C60/C61/C62)
- Wiping operation
Wipes the nozzle plate by the rubber part on the Cap unit.
- Flashing operation
Prevents color from mixing, and stabilizes ink surface inside the nozzle.
CL1'
- Ink absorption
Black Ink: 0.94g, Color Ink: 0.94g
(Stylus C50)
Black Ink: 0.80g, Color Ink: 0.80g
(Stylus C60/C61/C62)
- Wiping operation
Wipes the nozzle plate by the rubber part on the Cap unit.
- Flashing operation
Prevents color from mixing and stabilizes ink surface inside the nozzle.

Table of Contents

Other manuals for Epson Stylus C62

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Stylus C62 and is the answer not in the manual?

Epson Stylus C62 Specifications

Printing IconPrinting
printing method4-color (CMYK) drop-on-demand Micro Piezo ink jet technology
resolution (dots per inch)Up to 5760 x 720 optimized dpi
print speed (black text memo)14 ppm
Paper Handling IconPaper Handling
maximum paper sizeup to 8.5" x 44"
input paper tray capacity100 sheets/10 envelopes
envelope typesNo. 10, DL, C6
Dimensions and Weight IconDimensions and Weight
dimensions (L x W x H)18.8" x 10.2" x 7.1"
weight7.5 lb
maximum printable area8.26" x 10.76"

Related product manuals