Epson Stylus C62 User Manual

EPSON Stylus C50/C60/C61/C62 Revision C
Troubleshooting Unit Level Troubleshooting 68
Paper jam error
Power : On
Error : On
Paper jam
Operation
Outside HP Holder shaft unit
The Torsion spring 0.22 for HP sensor lever comes off.
Refer to Table 3-7
The HP/PE sensor cable is not placed correctly.
-
ASF unit The Compression spring 29.1comes off.
Front frame
The Star wheel comes off.
The Front frame is bent down.
The Front frame is not assembled correctly.
Holder shaft unit The Torsion spring 0.22 for PE sensor lever comes off.
Paper eject roller unit
The Paper eject roller shaft comes off. *
The Spur gear 60 comes off.
Paper guide upper/left The Paper guide upper/left comes off completely.
Table 3-6. Paper jam error condition and possible cause
Error condition
LED indication
STM3 message
Occurrence
timing
CR position at the
power on timing
Unit/Part name Possible cause Check table

Epson Stylus C62 Specifications

Printing

printing method	4-color (CMYK) drop-on-demand Micro Piezo ink jet technology
resolution (dots per inch)	Up to 5760 x 720 optimized dpi
print speed (black text memo)	14 ppm

Paper Handling

maximum paper size	up to 8.5" x 44"
input paper tray capacity	100 sheets/10 envelopes
envelope types	No. 10, DL, C6

Dimensions and Weight

dimensions (L x W x H)	18.8" x 10.2" x 7.1"
weight	7.5 lb
maximum printable area	8.26" x 10.76"