Epson Stylus Photo 1390 - Page 118

EPSON Stylus Photo 1390/1400/1410 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly/Assembly Procedures 118
6. Slide the Front Paper Eject Roller to the left, and remove the Left Bushing 8 from
the Main Frame.
Figure 4-119. Removing the Left Bushing 8
7. Return the Carriage Unit to its home position.
8. Release the tab that secures the Front Paper Guide from the Main Frame and slide
the Front Paper Guide to the left, and turn it until the front side faces up to remove
the Front Paper Guide together with the Paper Eject Roller.
Figure 4-120. Removing the Front Paper Guide and Paper Eject Rollers
Front Paper Eject Roller
Tab
Front Paper Eject
Roller
Front Paper
Guide
Rear Paper Eject
Roller
 Align the Bushing of the Front Paper Guide with the PF Roller
Shaft.
Figure 4-121. The PF Roller Shaft and the Bushing of the
Front Paper Guide
 Align the positioning holes on the Main Frame with the Guide
Pins on the Front Paper Guide.
Figure 4-122. Installing the Front Paper Guide
Shaft and Bushing
Positioning Holes and
Guide Pins