Epson Stylus Photo 1390 - Page 60

EPSON Stylus Photo 1390/1400/1410 Revision B
TROUBLESHOOTING Overview 60
At power-on At power-on, the PF Roller
rotates fast about a half turn.
PF Scale 1. Check that the PF Scale is inserted in the slit of the PF Encoder
Sensor.
1. Install the PF Scale in the slit of the PF
Encoder Sensor correctly.
2. Check the PF Scale for damages and dirt. 2. Replace the PF Scale with a new one.
During printing* After receiving a print data, or
while performing the CD/DVD
Tray home position detection
sequence, an error is displayed
on the LED and STM3.
CSIC FFC
Head FFC
Sensor FFC
1. Check that the CSIC FFC, Head FFC, and the Sensor FFC are
securely connected to the Main Board Connectors CN10, CN11,
CN12, CN14 and CN15.
1. Connect the CSIC FFC, Head FFC, and the
Sensor FFC to the Main Board Connectors
CN10, CN11, CN12, CN14 and CN15.
Table 3-11. Troubleshooting of Fatal Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
Slit
PF Scale
CN10, CN11, CN12, CN14 and CN15
Note *: Stylus Photo 1390 does not have the CD/DVD-related units.