Epson Stylus Photo 1390 - Page 61

EPSON Stylus Photo 1390/1400/1410 Revision B
TROUBLESHOOTING Overview 61
During printing After starting to print, ink is not
ejected and paper stops midway.
Head FFC 1. Check that the Head FFC is securely connected to the Print Head
Connector and Main Board Connectors CN10, CN11 and CN12.
1. Connect the Head FFC to the Print Head
Connector and Main Board Connectors CN10,
CN11 and CN12.
2. Check the Head FFC for damages. 2. Replace the Head FFC with a new one.
Ink is not ejected from most
nozzles.
Print Head 1. Check for occurrence of Head Hot. 1. Replace the Print Head with a new one.
Table 3-11. Troubleshooting of Fatal Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
Print Head
Connector
Head FFC
CN10, 11, 12