Epson Stylus Photo 895 - Head ID

EPSON Stylus PHOTO 895/785EPX Revision A
Adjustment Adjustments with the service program 121
5.3.4 Head ID
This adjustment writes the ID numbers for the Printhead into the EEPROM, and
enables the current settings to be confirmed.
Figure 5-8. Head ID adjustment items
Click on the item to be adjusted, and then click on the [OK] button. If [Check head ID]
has been selected, the value will be displayed in the center of the screen at the bottom.
If [Input Head ID] has been selected, the following screen will be displayed to enable
the head ID to be entered.
Figure 5-9. Input head ID
Check the 13-character ID written on each of the print heads, and enter the ID for the
head that has been replaced. Click on the [OK] button when the ID has been entered.
Click on the [Previous] button to return to the previous screen.