Epson Stylus Photo 895 - Accessories and Option; Changing the Model Name

EPSON Stylus PHOTO 895/785EPX Revision A
PRODUCT DESCRIPTION Accessories and Option 29
1.14 Accessories and Option

Standard accessories
² Instruction manual
² Ink cartridge (black, color)
² CD-ROM (Printer driver, utility)
² Roll paper holder

Option
² Preview monitor
1.15 Changing the Model Name
By setting the proper values in addresses 5EH and 60H to 7DH in EEPROM, the
Device ID and the model name in the BDC-ID can be changed. The other fields other
than the model name are fixed and cannot be changed.
* The values parenthesis are used when IEEE 1284.4 is valid. [nn] indicates the
number of bytes in <Model Name String> stored in E2H-FFH. “ 00H” should
be place at the end of the model name string.
Table 1-12. Setting the Model Name
EEPROM setting
Device ID
bytes counter
MDL value for Device
ID and BDC-ID
5EH 60H~7DH
World Standard
Device
(Euro, Asia)
00H don't care
[00H]
[4EH (51H)]
MDL:
Stylus Photo 895;
Japanese
Standard Device
01H don't care
[00H]
[46H (49H)]
MDL:
PM-790PT;
Custom 02H
<Model Name
String)
[00H]
[37H(4AH)+nnx2]*
MDL:
<Model Name String>
World Standard
Device (US)
03H don't care
[00H]
[51H (54H)]
MDL:
Stylus Photo 785EPX;