EPSON Stylus PHOTO 895/785EPX Revision A
Appendix Connector Summary 146
7.1 Connector Summary
7.1.1 Major Component Unit
The Major component units of this printer are as follows.
Main Board (C408 MAIN)
Power Supply Board (C408 PSE)
Monochrome panel board (C408 PNL)
Printer panel board (C408PNL-B)
The figure below shows how these components connect.
Figure 7-1. Connection of the Major Components
See the following tables for the connector summary for the C408 MAIN board and
each connector’s pin alignment.
CN8,
CN9
CN12
CN4
CR motor
Printhead
PF motor
C408MAIN
CN7
CN1
CN10
HP sensor
C408 PSE
CN2
CN1
Printer Mechanism
USB
CN3
CN11
CN5 CN13
CN14
CN2
PE sensor
PCMCIA
Preview monitor
Printer PNL
Monochrome PNL
AC power
ASF motor
Table 7-1. Connector Summary for C408 MAIN
Connector Function Table to refer to
CN1 PCMCIA
Table 7-2 "CN1
PCMCIA"
CN2 Preview monitor
Table 7-3 "CN2
Preview Monitor"
CN3 USB I/F
Table 1-3 "Connector
Pin Assignment and
Signals"
CN4 HP sensor
Table 7-4 "CN4
Sensor"
CN5 PE sensor
Table 7-5 "CN5 PE
Sensor"
CN7 Printer PNL
Table 7-6 "CN7
Printer PNL"
CN8, CN9 Printhead
Table 7-7 "CN8
Printhead"Table 7-8
"CN9 Printhead"
CN10 Power supply board
Table 7-9 "CN10
Power Connector"
CN11 ASF motor
Table 7-10 "CN11
ASF Motor"
CN12 PF motor
Table 7-11 "CN12 PF
Motor"
CN13 CR motor
Table 7-12 "CN13
CR Motor"
CN14 Monochrome PNL
Table 7-13 "CN14
Monochrome PNL"