Epson Stylus Photo 895 - Printer Condition and Panel Status

EPSON Stylus PHOTO 895/785EPX Revision A
PRODUCT DESCRIPTION Printer PNL Operation Specifications 19
.
1.6.4 Printer Condition and Panel Status
"-": No change.
"A->B": A is a indicator condition when carriage is on Home Position
B is indicator in ink exchange sequence.
•Blink: Repeats lighting on for 0.5 sec.+ off for 0.5 sec.
•Blink2: Repeats lighting on for 0.2 sec.+ off for 0.2 sec. + on for 0.2 sec.+ off
for0.4 sec.
Table 1-6. Special Setting Mode
Switch Function
Maintenance
• Initialize EEPROM.
Roll paper
(Pushing for 10 seconds)
• Reset the ink overflow counter in the
EEPROM.
Table 1-7. Error LED Indication
Printer Status Error LED Priority
Power ON - 10
Ink sequence proceeding - 6
Ink cartridge changing - 5
Data processing - 9
Paper out On 4
Paper jam condition On 3
Ink end (black) On -> Blink 8
Ink low (black) Blink 8
Ink end (color) On -> Blink2 9
Ink low (color) Blink 8
Ink end (both color, black) On -> On 8
No ink cartridge (color or black) On 7
Reset, Timer IC reset, EEPROM clear On (1s) -
Ink overflow counter reset On (2s) -
Maintenance request
(Ink overflow counter)
Blink 2
Fatal error On 1
Special setting Blink2 -