212 Replacing Ink Cartridges
3. Press the H ink button. The print head moves to the ink
cartridge replacement position and the P power light begins
to flash. If the ink in the cartridge is low, it is indicated by a
flashing ink out light just above the ink cartridge. If the ink
cartridge is empty, it is indicated by a lit ink out light just
above the ink cartridge.
Note:
❏ If an ink cartridge is low, you may continue to use it until it is
empty. To confirm the level of ink remaining in each cartridge,
see the following.
& See Using EPSON Status Monitor 3 for Windows
& See “Using EPSON StatusMonitor” on page 242 for
Macintosh
❏ Do not press the H ink button for more than three seconds.
Otherwise the printer starts cleaning the print head.
c
Caution:
Do not move the print head by hand, as this may damage the
printer. Always press the H ink button to move it.
To Next Page
Loading...
