EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 133
MAINT INFO MENU 0
Panel Setting
Info
01 Number of changes of the platen gap setting <nnnnnnnnn> Number of times
02 Number of changes of roll paper margin setting <nnnnnnnnn> Number of times
03 Number of executions of cutter position adjustment <nnnnnnnnn> Number of times
04 Date and time of the last cutter position adjustment <YY><MM><DD> Date and time
05 Number of times that the nozzle check pattern is printed <nnnnnnnnn> Number of times
06 Date and time of the last nozzle check pattern printing <YY><MM><DD> Date and time
07 Number of executions of Bi-D adjustment (BK) <nnnnnnnnn> Number of times
08 Date and time of the last Bi-D adjustment (BK) <YY><MM><DD> Date and time
09 Number of executions of Bi-D adjustment (All Colors) <nnnnnnnnn> Number of times
010 Date and time of the last Bi-D adjustment (All Colors) <YY><MM><DD> Date and time
011 Number of executions of Uni-D adjustment <nnnnnnnnn> Number of times
210 Date and time of the last Uni-D adjustment <YY><MM><DD> Date and time
013 Number of executions of Auto Bi-D adjustment (BK) <nnnnnnnnn> Number of times
014 Date and time of the last Auto Bi-D adjustment (BK) <YY><MM><DD> Date and time
015 Number of executions of Auto Bi-D adjustment (All Colors) <nnnnnnnnn> Number of times
016 Date and time of the last Auto Bi-D adjustment (All Colors) <YY><MM><DD> Date and time
017 Number of executions of Auto Uni-D adjustment <nnnnnnnnn> Number of times
018 Date and time of the last Auto Uni-D adjustment <YY><MM><DD> Date and time
019 Number of changes of the cut pressure <nnnnnnnnn> Number of times
020 Number of changes of the cut method <nnnnnnnnn> Number of times
021 Number of corrections of paper feed amount <nnnnnnnnn> Number of times
022 Number of changes of paper suction level <nnnnnnnnn> Number of times
023 Number of changes of print adjustment <nnnnnnnnn> Number of times
024 Number of executions of auto nozzle check <nnnnnnnnn> Number of times
025 Number of executions of cleaning after auto nozzle check <nnnnnnnnn> Number of times
026 Date and time of the last auto nozzle check <YY><MM><DD> Date and time
027 Number of corrections made by auto feed amount adjustment <nnnnnnnnn> Number of times
028 Date and time of the last auto feed amount adjustment <YY><MM><DD> Date and time
Continued to next page
Note : The number of executions of auto nozzle check is counted at the beginning of the sequence. Retries when dot missing is detected are not counted.
Table 1-64. MAIN INFO Menu Items (continued)
Top menu 1st hierarchy 2nd hierarchy
Settings Unit
Item Item Description Item Description
To Next Page
Loading...
