Epson Stylus Pro 7400 - Check Cutting

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Check Results 365
5.5.4 Check Cutting
The printer performs a cutting operation specified number of times when this menu is
executed. Check the cutter for wear by examining the cut surface of the paper.
 Paper Used
 Size: 24” (Stylus Pro 7400/7800)
44” (Stylus Pro 9400/9800)
 Type: Doubleweight Matte Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Check Cutting].
3. Enter the desired number of cutting operations into the [Number of cut] edit
box and click the [Run] button.
4. Examine the cutting surface of the ejected paper. Then click the [Finish]
button.
Figure 5-102. [Check Cutting] Screen