Epson Stylus Pro 7400 - PF Micro Feed Adjustment (Bi-D)

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Advanced Adjustment 361
5.4.4 PF Micro Feed Adjustment (Bi-D)
Print quality on media used by the user can be adjusted using the EPSON LFP Remote
Panel.
The EPSON LFP Remote Panel has the following functions:
 Adjustment:
Adjustment of the paper feed amount and the microweave.
 Printout settings:
Prints out the correction values of the paper feed amount and the microweave
stored on the printer.
 Settings Initialization:
Returns the settings for the paper feed amount and the microweave to their factory
default.
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [PF Micro Feed Adjustment (Bi-
D)].
3. Click the [Run] button to run the EPSON LFP Remote Panel.
4. Select [Paper Feed Adjuster], and perform the paper feed amount (Adjust) and
the microweave adjustments (MicroWeave Adjustment).
Figure 5-95. [PF Micro Feed Adjustment (Bi-D)] Screen
Figure 5-96. EPSON LFP Remote Panel Startup Screen
C H E C K
P O I N T
For the operation method of the EPSON LFP Remote Panel, refer
its help function.