Epson Stylus Pro 7400 - Initial Ink Charge Flag ON;OFF

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 337
5.3.17 Initial Ink Charge Flag ON/OFF
 Procedure
1. Enter into the Serviceman Mode.
Turn the printer ON while holding down the [Paper Source ], [Menu
], and [Paper Feed ].
2. Start up the Adjustment Program and select [Initial Ink charge flag ON/OFF].
3. Select “ON” or “OFF” and click the [Run] button.
4. Click the [Finish] button.
Figure 5-59. [Initial Ink Charge Flag ON/OFF] Screen