Epson Stylus Pro 7400 - Panel Setting

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 50
1.4.4 Panel Setting
1.4.4.1 Outline
 Entering the Panel Setting Mode
The printer can go into the Panel Setting mode by the [Menu ] button when it is
in “Ready” status, and even when a warning error, Paper Out error, or ink cartridge
error (except the cartridge destination error) is occurring. Printing operation is
disabled while the printer is in the mode.
 Using the Panel Setting Menu
1. When the [Menu ] button is pressed under the condition described above,
the top menu of the Panel Setting menu is displayed.
2. Use the [Paper Feed ( ) ] buttons to select (highlight) the menu item.
When a target item is highlighted, press the [Menu ] button to display the
menu screen of the selected item.
3. Select an item in the menu screen using the [Paper Feed ( ) ] buttons and
press theÇš[Menu ] button. A list of selectable settings is displayed.
4. A setting displayed with * (asterisk) is the current setting. Use the [Paper Feed
( ) ] buttons to change the setting.
5. After highlighting your choice, press the [Enter ] button to accept the
setting or execute the function. If you press the [Enter ] button when the
current setting (with asterisk) is highlighted, nothing happens.
6. To back to the previous screen, press the [Paper Select ] button.
 Exiting from the Panel Setting Mode
Any one of the following operations returns the printer to “ready for printing”
status.
 Press the [Pause] button.
 Press the [Paper Select ] button while the top menu is displayed.
 When the INITIALIZE SETTINGS in the PRINTER SETUP menu is
executed and finished.
 When any one of items in the TEST PRINT menu is executed and finished.
 When the BK INK CHANE (changing black ink between Photo black and
Matte black) in the MAINTENANCE menu is executed and finished. (Stylus
Pro 7800 and Stylus Pro 9800 only.)
 When the CUTTER REPLACEMENT in the MAINTENANCE menu is
executed and finished.
NOTE:
While the printer running or executing the selected function in the Panel
Setting menu, it cannot be returned to the ready status.