Epson Stylus Pro 7400 - 980 Mm Band Feed Adjustment

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 336
5.3.16 980mm Band Feed Adjustment
 Paper Used
 Size: 24” (Stylus Pro 7400/7800)
44” (Stylus Pro 9400/9800)
 Type: Doubleweight Matte Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [980mm Band Feed Adjustment].
3. Click the [Print] button to print the adjustment pattern.
4. Measure the distance shown in Figure 5-58 with a 1000 mm ruler and a scale
stopper.
5. Enter the measured value into the [980mm Band] edit box and click the
[Write] button.
6. Click the [Finish] button.
Figure 5-57. [980mm Band Feed Adjustment] Screen
Figure 5-58. Adjustment Pattern
C H E C K
P O I N T
A line printed on the center is a guide line to help the measurement.
Measurement