EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 335
Check Procedure
1. Click the [Check] button to print the check pattern.
2. Check if the printed lines align with the edge of the platen tabs holding down
the Ink Pad as shown in Figure 5-56. If it does, click the [Finish] button.
If the lines are not in proper alignment with the platen tabs, click the [Back]
button to perform the adjustment again.
Figure 5-55. [Platen Position Adjustment] Screen (2)
Figure 5-56. Adjustment Pattern
OK NG
To Next Page
Loading...
