Epson Stylus Pro 7400 - Optional Interface

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Interface 141
1.6.3 Optional Interface
Type-B interface (level 3, MIB, 1200mA type) is supported.
REPLY MESSAGE
 Main-Type
 Stylus Pro 7400/7800
MT48p,PW240cl10cpi,PRG(SN0xxxx)rev,AP800ma,SPD0fast,D4,GDI
 Stylus Pro 9400/9800
MT48p,PW440cl10cpi,PRG(SW0xxxx)rev,AP800ma,SPD0fast,D4,GDI
NOTE: xxxx is F/W version.
 Product-Name: <Model Name>
 Emulation-Type: ESCPL2-00
 Entity-Type: EPSONLQ2
REPLY FOR OPTION COMMAND
Table 1-68. Reply List
Option command
number
Command name Reply-A Reply-B
00h No-operation Accept None
01h Start Hardware Reset Accept Execute OK
02h Start Software Reset Reject
03h Send Main System Type Accept
04h Send Name Data Reject
05h Inquire Name Data Accept
06h Send Product Name Accept
07h Send Software Emulation Type Accept
08h Complete Buffered Data Accept Check Condition
09h Stop Procedure Reject Execute OK
0Ah Return Buffered Data Reject
0Bh Send Entity Type Accept
0Ch Send Status Accept
0Dh Quit Procedure Reject
0Eh Inquire ASCII Message Reject
0Fh Send ASCII Message Accept None
10h-13h --- Unknown None
14h Inquire Emergency Message Accept Execute OK
15h Send Emergency Reply Accept
16h-1Fh --- Unknown None
20h-FFh --- Reserved None