Epson Stylus Pro 7400 - Paper Specifications

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Basic Specifications 16
1.2.4 Paper Specifications
1.2.4.1 Roll Paper
The allowable roll paper dimensions are shown in the table below. See “1.2.4.4
Allowable EPSON and Other Media” (p.18) for details on the allowable paper
specifications.
 Paper size *:
Note : The core sizes are their interior diameters.
Note "*": Auto nozzle check cannot be carried out on paper with a width less than 210mm.
 Roll paper size:
 2 Inch core: Outer diameter within 103mm/
1 roll set possible
 3 Inch core: Outer diameter within 150mm/
1 roll set possible
 Paper thickness:
 Special paper: 3.15 to 19.67 mil (0.08 to 0.50 mm)
 Plain paper: 3.15 to 4.33 mil (0.08 to 0.11 mm)
 Paper basis mass:
 Special paper: 64 to 260 gf/m
2
 Plain paper: 64 to 90 gf/m
2
NOTE • Do not use curled, folded, or deckle-edge paper.
• Be sure to use the Type 3 adapter included in the package when using the 3-
inch core roll paper.
• For best result, use paper under the following conditions:
Temperature: 59 to 77 ºF (15 to 25 ºC)
Humidity: 40 to 60 % RH
1.2.4.2 Cut Sheet
The allowable cut sheet paper dimensions are shown in the table below. See “1.2.4.4
Allowable EPSON and Other Media” (p.18) for details on the allowable paper
specifications.
 Paper size *:
Note "*": Auto nozzle check cannot be carried out on paper with a width less than 210mm.
 Paper thickness:
 Paper length more than 279 mm up to 728 mm:
3.15 to 59 mil (0.08 to 1.50 mm)
 Paper length exceeding 728 mm up to 1580 mm:
3.15 to 19.67 mil (0.08 to 0.50 mm)
 Plain paper: 3.15 to 4.33 mil (0.08 to 0.11 mm)
 Paper basis mass:
 Special paper: 64 to 260 gf/m
2
 Plain paper: 64 to 90 gf/m
2
NOTE • Basically, portrait printing only.
• Do not use curled, folded, or deckle-edge paper.
• For best result, use paper under the following conditions:
Temperature: 59 to 77 ºF (15 to 25 ºC)
Humidity: 40 to 60 % RH
Table 1-7. Roll Paper Sizes
Core Model Paper size
2-inch core Stylus Pro 7400/7800 203mm~610mm (W) x ~45m (H)
Stylus Pro 9400/9800 203mm~1,118mm (W) x ~45m (H)
3-inch core Stylus Pro 7400/7800 203mm~610mm (W) x ~220m (H)
Stylus Pro 9400/9800 203mm~1,118mm (W) x ~220m (H)
Table 1-8. Cut Sheet Sizes
Core Model Paper size
Paper width Stylus Pro 7400/7800 203mm~610mm
Stylus Pro 9400/9800 203mm~1,118mm
Paper length Stylus Pro 7400/7800 279mm~1,580mm
Stylus Pro 9400/9800 279mm~1,580mm