EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 212
4.2 Disassembly Procedure
The disassembly flowchart is given on the next page.
C A U T I O N
Disassembling the frame and some components of the printer is
prohibited because they are assembled with precise
measurements in 1/100 mm unit at the factory. Parts or
components allowed to be disassembled/reassembled are listed
with there part numbers on “Parts List” in Appendix. If you
disassemble and reassemble any one of the prohibited parts or
components, which is not listed on the Parts List, the printer
could result in serious non-recoverable error that requires
repair at the factory.
When servicing on-site, do not disassemble any parts or
components that are not described in this chapter.
To Next Page
Loading...
