Epson Stylus Pro 7400 - Check Alignment

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Check Results 363
5.5.2 Check Alignment
This allows you to check the print alignment for each of the three print modes (VSD1,
VSD2, VSD3). If any misalignment symptoms or abnormalities are found on the
printed pattern, a cleaning must be performed.
 Paper Used
 Size: 24” (Stylus Pro 7400/7800)
44” (Stylus Pro 9400/9800)
 Type: Premium Glossy Photo Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Check Alignment].
3. Select the print mode and click the [Print] button to print a alignment check
pattern.
4. Check the printout pattern for any misalignment symptoms.
5. When no misalignment symptom is observed, click the [Finish] button to exit
out of the menu.
If misalignment is found on the pattern, perform a cleaning. Then print the
pattern again to check.
Figure 5-99. [Check Alignment] Screen
Figure 5-100. Alignment Check Pattern
Horizontal
Alignment
Vertical
Alignment