Epson Stylus Pro 7400 - Page 260

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 260
4.2.6.4 SCALE, PF
1. Remove the PF Encoder Mounting Plate. See Section 4.2.6.2 on page 255.
2. Remove the three screws that secure the PF Encoder Retainer and remove it
together with the SCALE, PF.
 Three C.C.P. M3 x 6 screws
Figure 4-92. Removing the SCALE, PF
C.C.P 3x6
SCALE, PF
PF Encoder Retainer
Left Side of the Printer