Epson Stylus Pro 7400 - Page 359

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Advanced Adjustment 359
9. Click the [Print] button to print the Bi-D adjustment pattern for color ink
( ). (The pattern is printed in VSD1, VSD2, and VSD3 modes, so three
patterns are printed at a time.)
10. Examine the printout patterns for each of the three modes, and select the value
for the group of most closely aligned blocks for each mode. Then enter the
values into the edit boxes ( ).
11. Click the [Write] button ( ) to write the input values. When the writing is
completed, click the [OK] button ( ).
12. Click the [Finish] button ( ).
Figure 5-90. [Manual Bi-D Adjustment] Screen (2)
Figure 5-91. Adjustment Patterns (Color)
C H E C K
P O I N T
The printed pattern is changed 2 steps, but you can input in 1-step
unit.
8
9
10
11
12
8
9
11
12
10