Epson Stylus Pro 7400 - Page 78

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 78
1.4.4.21 Printing Custom Paper Information
User-defined paper settings stored on the printer using the CUSTOM PAPER menu
can be printed out by executing the “Custom Paper” in the TEST PRINT menu.
The following two items are required to print the Custom Paper information.
 Print paper size: A4
 Font: Built-in font (Print all in alphanumeric characters)
NOTE: “?” is printed out for the settings made by two-byte characters.
Figure 1-21. Custom Paper Information
Paper No.1
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.2
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.3
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.4
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.5
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.6
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.7
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.8
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.9
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %
Paper No.10
Custom Name : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Platen Gap : Standard Drying Time : 10.0 sec Suction : Standard
Cut Method : ThickPaperFast M/W Adj. : Standard
Ppr Thick. : 0.2mm Ppr Feed Adj. : -0.70 %