46
Change Scan Settings
1. Open Epson Event Manager.
• Windows:
Click or Start > All Programs or Programs > Epson Software > Event Manager.
• Mac OS X 10.4 or 10.5:
Open the Applications folder, then the Epson Software folder, then click Event
Manager.
2. If necessary, select your product as the Scanner.
3. Click Make Job Settings.
4. Select the job setting that you want to modify from the Edit Job Settings drop-down list.
5. Select job settings as necessary.
6. Click OK when you’re done selecting settings.
7. Click Close to exit the Epson Event Manager settings screen.
Start Epson Scan
Before you start Epson Scan, place your original on the scanner glass.
Windows:
Double-click the EPSON Scan icon on your Windows desktop.
Mac OS X 10.4 or 10.5:
Open the Applications folder, then the Epson Software folder, and double-click the EPSON
Scan icon.
Mac OS X 10.6:
You cannot use Epson Scan with Mac OS X 10.6. Use the ICA application
in Mac OS X 10.6 to
scan a photo or document.
Note:
You can also start scanning from the control panel
or another scanning program.
Press both buttons to scan
To Next Page
Loading...
