108
2. Tightly seal the used waste ink tank bottle.
3. Insert the waste ink tube into the new waste ink bottle and place the bottle in the holder.
Note: Be sure the waste ink tube is inserted in the waste ink bottle or waste ink could spill onto your
product. Store the cap from the new ink bottle for later use.
4. Press the OK button on the product control panel.
5. Press the OK button again to reset the waste ink counter.
Parent topic: Maintenance
Related references
Consumables and Replacement Parts
Handling Ink and Cleaning Cartridges
Maintenance Precautions
Maintenance Menu Settings
Used Parts Disposal Guidelines
Replacing the Maintenance Parts
When you see a message telling you that maintenance parts are nearing the end of their life, you need to
replace the maintenance parts soon. Make sure you have a new maintenance parts kit handy.
When you see a message telling you to replace the maintenance parts, you need to replace the
maintenance parts to continue printing.
Replace all the maintenance parts at the same time.
Note: You can also replace the maintenance parts at any time by selecting Replace Parts from the
Maintenance menu.
Caution: Make sure you select Replace Parts or wait for the message to replace the maintenance parts
to appear on the LCD screen before replacing the maintenance parts; otherwise the product's
maintenance counter will not reset.
The maintenance parts kit includes the following items:
• 1 wiper unit
• 1 flushing pad
• 2 air filters
To Next Page
Loading...
