Epson SureColor S40600 - Moving or Transporting the Product; Prepare to Move the Product

135
Moving or Transporting the Product
When moving the product, see these sections to prepare and move the product, and set it back up after
moving it.
If you need to transport the product a long distance, contact Epson support.
Prepare to Move the Product
Setting Up the Product After Moving
Prepare to Move the Product
Do the following before moving the product:
1. Remove any loaded media from the media feeding unit and auto take-up reel.
2. Turn off the product.
3. Remove the waste ink bottle.
4. Remove all cables.
5. Release the caster locks on the left and right legs.