141
LCD screen message Solution
Call For Service
XXX Error XXX
Power off and then on. If this
doesn't work, note the code and
call for service.
A call for service occurs when:
• The power cable is not connected securely
• An error occurs that cannot be cleared
When a call for service has occurred, the printer automatically stops
printing. Turn off the printer, disconnect the power cable from both
the outlet and the printer, and then reconnect them. Turn the printer
on and off several times. If the same call for service is displayed on
the LCD screen, contact Epson for support and provide them with
the service code shown on the LCD screen.
Parent topic: Solving Problems
Related concepts
Print Head Maintenance
Related references
Where to Get Help
Printer Setup Menu Settings
Consumables and Replacement Parts
Related tasks
Replacing the Waste Ink Bottle
Replacing the Ink Cartridges
Solving Printer Problems
Check these sections if you have problems operating your product.
Printer Does Not Turn On
LCD Screen Shuts Off
After Heater Shuts Off
Forgot the Administrator Password
Red Light Shines Inside the Printer
Parent topic: Solving Problems
To Next Page
Loading...
