86
Procedure Frequency
Clean print head When a clog is found after a nozzle check
Pre-storage maintenance When you will turn off the printer and not use it for a long time
Change color mode
(SC-S80600 only)
When switching between White and Metallic Silver ink cartridges or
when you no longer need to use either spot color
Clean pressure rollers If dirt from the rollers adheres to your printout
Clean inside the front cover If it is hard to see inside the printer
Apply grease to the carriage
rod
When a greasing message is displayed on the LCD screen
Parent topic: Maintenance
Related concepts
Print Head Maintenance
Related tasks
Cleaning the Platen Heater and Media Edge Plates
Cleaning Around the Print Head
Cleaning the Anti-drying Caps
Replacing the Waste Ink Bottle
Replacing the Maintenance Parts
Replacing the Media Edge Plates
Performing Pre-storage Maintenance
Changing the Color Mode
Cleaning the Pressure Rollers
Cleaning Inside the Front Cover
Applying Carriage Rod Grease
Related topics
Shaking and Replacing Ink Cartridges
Preparing for Maintenance
Before you perform any maintenance procedures, see these sections to prepare for maintenance.
Maintenance Supplies
To Next Page
Loading...
