114
15. Insert the new air filters as shown.
16. Press OK button.
17. Close the maintenance cover and press the OK button.
You see a confirmation screen.
18. Select Yes and press the OK button.
Parent topic: Maintenance
Related references
Consumables and Replacement Parts
Maintenance Precautions
Maintenance Menu Settings
Used Parts Disposal Guidelines
Replacing the Media Edge Plates
If the media edge plates that came with your product become damaged or deformed, you need to
replace them.
Caution: Continued use of damaged or deformed media holding plates may damage the print heads.
1. Remove any media loaded in the product.
2. Turn off the product, wait for the LCD screen to turn off, and unplug both power cables. If the
optional drying system is installed, unplug the power cable for it also.
To Next Page
Loading...
