124
Note: If you performed pre-storage maintenance for the White and Metallic Silver ink cartridges and
later need to do it for all the colors, fill the White and Metallic Silver ink first, then perform pre-storage
maintenance again (SC-S80600).
1. Press the maintenance button.
You see the Maintenance menu on the product LCD screen.
2. Press the up or down arrow button to select Pre-Storage Maint and press the OK button.
3. Select one of the following and press the OK button:
• All Nozzles
• WH (SC-S80600)
• MS (SC-S80600)
4. Follow the on-screen instructions to replace the cartridges.
When you are ready to use the product again, turn it on and follow the on-screen instructions.
Note: If you re-install used ink cartridges that are low on ink, you may need additional ink cartridges to
finish charging the ink system.
Parent topic: Maintenance
Related references
Maintenance Precautions
Consumables and Replacement Parts
Maintenance Menu Settings
Changing the Color Mode
You need to change the printer's color mode when switching between the White or Metallic Silver ink
cartridges (SC-S80600). It takes approximately one hour to change color modes. You need a cleaning
cartridge when switching between the White and Metallic Silver ink cartridges, or when switching to 9
Color Mode. (You do not need a cleaning cartridge when switching from 9 Color Mode to either of the
other two color modes.)
To save on ink, switch to 9 Color Mode if you do not plan on using the White or Metallic Silver ink
cartridges for 20 or more days.
Note: You may not be able to switch color modes if the cleaning cartridge, or the White or Metallic Silver
ink cartridges, are low. Have new cartridges handy before switching color modes.
To Next Page
Loading...
