EasyManua.ls Logo

Epson SureColor S40600 - Printer Does Not Turn on; LCD Screen Shuts off; After Heater Shuts off; Forgot the Administrator Password

Epson SureColor S40600
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
142
Printer Does Not Turn On
If the printer does not turn on, try these solutions:
Make sure the power cable is securely connected.
Make sure the power outlet works by connecting the power cable for another electronic device.
Parent topic: Solving Printer Problems
LCD Screen Shuts Off
If the LCD screen shuts off intermittently, the printer may be in Sleep Mode. Try these solutions:
Press any of the buttons on the control panel to reactivate the display. Then perform a hardware
operation such as opening the printer cover or sending a job to the printer.
You can adjust the delay time before the product enters sleep mode in the Printer Setup menu.
Parent topic: Solving Printer Problems
Related references
Printer Setup Menu Settings
After Heater Shuts Off
If the after heater turns off automatically, try these solutions:
Press any of the buttons on the control panel to reactivate the display. Then perform a hardware
operation such as opening the printer cover or sending a job to the printer.
You can adjust the time before the after heater turns off in the control panel to lengthen the time before
they turn off automatically.
Parent topic: Solving Printer Problems
Related references
Printer Setup Menu Settings
Forgot the Administrator Password
If you forgot the administrator password you created during network setup, contact Epson for support.
Parent topic: Solving Printer Problems
Related references
Where to Get Help

Table of Contents

Other manuals for Epson SureColor S40600

Related product manuals